Part number:
AT89C5131A
Manufacturer:
ATMEL Corporation
File Size:
385.70 KB
Description:
Usb microcontrollers.
* www.DataSheet4U.com
* Protocol
* USB Used as Physical Layer
* Device Firmware Upgrade Class Compliant
* USB Clock Auto-Configuration
* In-System Programming
* Read/Write Flash and EEPROM Memories
* Read Device ID
* Full-chip Erase
AT89C5131A Datasheet (385.70 KB)
AT89C5131A
ATMEL Corporation
385.70 KB
Usb microcontrollers.
📁 Related Datasheet
AT89C5131 - 8-bit Flash Microcontroller
(ATMEL Corporation)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24MHz in X2 Mode – Dual Data Pointer – Full-duplex Enha.
AT89C5131A-L - 8-bit Flash Microcontroller
(ATMEL)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode
– Dual Data Pointer – Full-duplex Enh.
AT89C5131A-M - 8-bit Flash Microcontroller
(ATMEL Corporation)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode – Dual Data Pointer – Full-duplex Enh.
AT89C5130A-M - 8-bit Flash Microcontroller
(ATMEL Corporation)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode – Dual Data Pointer – Full-duplex Enh.
AT89C5132 - (AT83C5132 / AT89C5132) Usb C51-based Microcontroller
(ATMEL Corporation)
Features
• Programmable Audio Output for Interfacing with Common Audio DAC
– PCM Format Compatible – I2S Format Compatible • 8-bit MCU C51 Core-based .
AT89C51 - 8-Bit Microcontroller
(ATMEL)
Features
• Compatible with MCS-51™ Products • 4K Bytes of In-System Reprogrammable Flash Memory
– Endurance: 1,000 Write/Erase Cycles • Fully Static O.
AT89C5115 - Low Pin Countl 8-bit Microcontroller
(ATMEL Corporation)
Features
• 80C51 Core Architecture • 256 Bytes of On-chip RAM • 256 Bytes of On-chip XRAM • 16K Bytes of On-chip Flash Memory
– Data Retention: 10 Yea.
AT89C5121 - 8-bit Microcontroller
(ATMEL Corporation)
Features
• 80C51 Core
– 12 or 6 Clocks per Instruction (X1 and X2 Modes) – 256 Bytes Scratchpad RAM – Dual Data Pointer – Two 16-bit Timer/Counters: T.