MAX22213 Datasheet - Analog Devices

MAX22213 3.8A Quad Half H-Bridge Drivers

The MAX22213 provides four individually controllable 36V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance resulting in high driving efficiency and low h.

MAX22213 Features

* OCP, thermal shutdown (TSD), and undervoltage lockout (UVLO). An open-drain, activelow FAULT pin is activated every time a fault condition is detected. During TSD and UVLO events, the driver outputs are three-stated until normal operations are restored. The MAX22213 is available into a small 5mm x 5

MAX22213 Datasheet (321.28 KB)