Datasheet4U Logo Datasheet4U.com

HI-8040 - CMOS HIGH VOLTAGE DISPLAY DRIVER

Datasheet Summary

Description

The HI-8040 is a CMOS integrated circuit designed for high voltage LCD display drive applications.

It can drive 85 segments at voltages between +5 and -30 volts.

An optional negative converter can generate the negative display drive voltage.

Features

  • ! 4 MHz serial input data rate ! 85 segment outputs ! Cascadable ! 5 Volt inputs translated to 35 Volts ! Test pins allow hardware all "ON", all "OFF" or alternating ! Monitors backplane oscillation and forces all segments to "OFF" condition if below 10Hz ! Negative voltage converter available on-chip ! CMOS low power ! Military processing available.

📥 Download Datasheet

Datasheet preview – HI-8040

Datasheet Details

Part number HI-8040
Manufacturer Holt Integrated Circuits
File Size 701.33 KB
Description CMOS HIGH VOLTAGE DISPLAY DRIVER
Datasheet download datasheet HI-8040 Datasheet
Additional preview pages of the HI-8040 datasheet.

📁 Similar Datasheet

  • HI-8045 - CMOS HIGH VOLTAGE DISPLAY DRIVER (Holt Integrated)
  • HI-8050 - CMOS High Voltage Display Driver (HOLTIC)
  • HI-8051 - CMOS High Voltage Display Driver (HOLTIC)
  • HI-8150 - CMOS High Voltage Display Driver (HOLTIC)
  • HI-8151 - CMOS High Voltage Display Driver (HOLTIC)
  • HI-8382 - (HI-8382 / HI-8383) ARINC 429 DIFFERENTIAL LINE DRIVER (Holt Integrated)
  • HI-8383 - (HI-8382 / HI-8383) ARINC 429 DIFFERENTIAL LINE DRIVER (Holt Integrated)
  • HI-8420 - 6-Channel / 8-Channel Discrete-to-Digital Interface (HOLTIC)
  • HI-8421 - six channel discrete-to-digital interface (HOLTIC)
  • HI-8422 - 16-Channel Discrete-to-Digital Interface (HOLTIC)
Other Datasheets by Holt Integrated Circuits
  • HI-8010 - CMOS HIGH VOLTAGE DISPLAY DRIVER
  • HI-8020 - CMOS HIGH VOLTAGE DISPLAY DRIVER
  • HI-8105 - PROGRAMMABLE DIVIDER WITH OSC OR CLK
  • HI-8106 - PROGRAMMABLE DIVIDER WITH OSC OR CLK
  • HI-8110 - CMOS HIGH VOLTAGE DISPLAY DRIVER
  • HI-8120 - CMOS HIGH VOLTAGE DISPLAY DRIVER
  • HI-8200 - Quad 10-Ohm +/-12V outside-the-rails Analog Switch
  • HI-8201 - Quad 10-Ohm +/-12V outside-the-rails Analog Switch

Full PDF Text Transcription

Click to expand full text
HI-8040 September 1999 GENERAL DESCRIPTION The HI-8040 is a CMOS integrated circuit designed for high voltage LCD display drive applications. It can drive 85 segments at voltages between +5 and -30 volts. An optional negative converter can generate the negative display drive voltage. Test inputs facilitate opens and shorts testing. The backplane frequency is checked and, as long as power is available, the segments are shut "Off" if the frequency becomes too low. The HI-8040 is part of a family of display drivers which control segment information in the same way. Data is serially clocked into the device and the data for all segment outputs are latched in parallel when the Load input transitions from high to low.
Published: |