MX1323AS - Synchronous Rectifier

Product Overview

MAXINMICRO

Datasheet Details

Part number	MX1323AS
Manufacturer	MAXINMICRO
File Size	419.86 KB
Description	Synchronous Rectifier
Datasheet	MX1323AS Datasheet
Additional preview pages of the MX1323AS datasheet.

Product details

Description

MX1323AS SOP8，Halogen-free，RoHS Package dissipation rating Package RθJA（℃/W） SOP8 90 Note: Drain Pin Connected to 200mm2 PCB copper clad.Absolute maximum ratings Parameter Value Drain Voltage (off state) 60 VDD Voltage -0.3 to 7V VOUT Voltage -0.3 to 25V Min/Max Operating Junction Temperature TJ -40 to 150℃ Min/Max Storage Temperature TSTG ESD(HBM) -55 to 150℃ ±2kV Lead Temperature (Soldering, 10secs) 260℃ Note: stresses beyond those listed under “absolute maximum ratin

Features

MX1323AS is a secondary side switch IC designed for flyback.
Internal 60V 10mΩ trench MOSFET converter. This IC emulate the behavior of diode rectifier for.
Up to 200kHz operation frequency reduces power dissipation. MX1323AS works in CCM、DCM.
80ns turn on propagation delay and 15ns turn off delay and quasi-resonant operation modes. Ruggedness and noise.
Lower quiescent current consumption immunity are accomplished using an advanced blanking.
CCM/DCM and Quasi-.

📁 Similar Datasheet

MX1300 - ALKALINE MANGANESE DIOXIDE BATTERY (ETC)
MX13002 - Energy-saving lamps electronic ballasts (Ningbo Mingxin Microelectronics)
MX1005 - 4/5-cell Lithium Battery Protection (ChipSourceTek)
MX1011B200Y - Microwave power transistor (Philips)
MX101C49 - 8-bit single chip microcomputer (ETC)
MX1051 - 2-5 cells of lithium battery secondary protection (ChipSourceTek)
MX105A - Tone Detector (CML)
MX10C805x - SINGLE-CHIP 8-BIT MICROCONTROLLER (MXIC)

Other Datasheets by MAXINMICRO

MX1313AS - Synchronous Rectifier
MX10010S - Synchronous Step-down Controller
MX1020W - Low Side GaN and MOSFET Driver
MX1025D - Low Side GaN and MOSFET Driver
MX1110T - High Precision CC/CV Primary-Side Power Controller
MX1112S - High Precision CC/CV Primary-Side Power Switch

Published: Jan 29, 2025 |