Datasheet4U Logo Datasheet4U.com

MAX5185 - 40MHz Current/Voltage Alternate-Phase Output DACs

This page provides the datasheet information for the MAX5185, a member of the MAX5182 40MHz Current/Voltage Alternate-Phase Output DACs family.

Description

The MAX5182 is a dual, 10-bit, alternate-phase-update, current-output digital-to-analog converter (DAC) designed for superior performance in systems requiring analog signal reconstruction with low distortion and low-power operation.

Features

  • o +2.7V to +3.3V Single-Supply Operation o Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz o Fully-Differential Outputs for Each DAC o ±0.5% FSR Gain Mismatch Between DAC Outputs o Low-Current Standby or Full-Shutdown Modes o Internal +1.2V Low-Noise Bandgap Reference o Small 28-Pin QSOP Package PART MAX5182BEEI MAX5185BEEI Ordering Information TEMP. RANGE -40°C to +85°C -40°C to +85°C PIN-.

📥 Download Datasheet

Datasheet preview – MAX5185

📁 Similar Datasheet

  • MAX518 - 2-Wire Serial 8-Bit DACs (Maxim)
  • MAX5180 - Current/Voltage Simultaneous-Output DACs (Maxim)
  • MAX5181 - 10-Bit / 40MHz / Current/Voltage-Output DACs (Maxim)
  • MAX5182 - 40MHz Current/Voltage Alternate-Phase Output DACs (Maxim)
  • MAX5184 - 10-Bit / 40MHz / Current/Voltage-Output DACs (Maxim)
  • MAX5186 - Dual / 8-Bit / 40MHz / Current/Voltage / Simultaneous-Output DACs (Maxim)
  • MAX5187 - 8-Bit / 40MHz / Current / Voltage-Output DACs (Maxim)
  • MAX5188 - Alternate-Phase Output DACs (Maxim)
  • MAX510 - Quad / Serial 8-Bit DACs (Maxim)
  • MAX5100 - +2.7V to +5.5V / Low-Power / Quad / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs (Maxim)
Other Datasheets by Maxim Integrated
  • MAX5183 - Current/Voltage Simultaneous-Output DACs
  • MAX5189 - Dual / 8-Bit / 40MHz / Current/Voltage / Simultaneous-Output DACs
  • MAX5113 - 14-Bit Current DAC
  • MAX5121 - Serial Voltage-Output DACs
  • MAX5123 - Force/Sense DACs
  • MAX5142 - 14-Bit DACs
  • MAX5143 - 14-Bit DACs
  • MAX5144 - 14-Bit DACs

Full PDF Text Transcription

Click to expand full text
19-1578; Rev 3; 12/01 MAX5182/MAX5185 Dual, 10-Bit, 40MHz Current/Voltage Alternate-Phase Output DACs General Description The MAX5182 is a dual, 10-bit, alternate-phase-update, current-output digital-to-analog converter (DAC) designed for superior performance in systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5185 provides equal specifications with on-chip output resistors for voltageoutput operation. Both devices are designed for 10pV-s glitch operation, to reduce distortion and minimize unwanted spurious signal components at the output. An on-board +1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation.
Published: |