TDA8542AT - 2 x 1.5 W BTL audio amplifier

Product Overview

NXP

TDA8542AT 2 x 1.5 W BTL audio amplifier by NXP - Datasheet Preview — Datasheet preview – TDA8542AT

Datasheet Details

Part number	TDA8542AT
Manufacturer	NXP
File Size	207.07 KB
Description	2 x 1.5 W BTL audio amplifier
Datasheet	TDA8542AT Datasheet
Additional preview pages of the TDA8542AT datasheet.

Product details

Description

TDA8542AT The TDA8542AT is a two channel audio power amplifier for an output power of 2 × 1.5 W with an 8 Ω load at a 6 V supply.The circuit contains two Bridge-Tied Load (BTL) amplifiers with a complementary PNP-NPN output stage and standby/mute logic.The TDA8542AT comes in a 20-pin SO package.TYP.6 15 1.5 0.15 MAX. UNIT V mA µA W % dB ORDERING INFORMATION TYPE NUMBER TDA8542AT PACKAGE NAME SO20 DESCRIPTION plastic small outli

Features

Flexibility in use.
Few external components.
Low saturation voltage of output stage.
Gain can be fixed with external resistors.
Standby mode controlled by CMOS compatible levels.
Low standby current.
No switch-on/switch-off plops.
High supply voltage ripple rejection.
Protected against electrostatic discharge.
Outputs short-circuit safe to ground, VCC and across the load.
Thermally protected. QUIC.

📁 Similar Datasheet

TDA8559T - Low-voltage stereo headphone amplifier (Philips)
TDA8566 - stereo BTL car radio power amplifier (NXP Semiconductors)
TDA8577 - Dual common-mode rejection differential line receiver (Philips)
TDA8588AJ - Power Amplifier and Multiple Voltage Regulator (Philips)
TDA8588BJ - Power Amplifier and Multiple Voltage Regulator (Philips)
TDA8588J - Power Amplifier and Multiple Voltage Regulator (Philips)
TDA8589BJ - I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator (Philips)
TDA8595 - I2C-bus controlled 4 x 45 W power amplifer (NXP Semiconductors)

Other Datasheets by NXP

TDA8542 - 2 x 1 W BTL audio amplifier
TDA8542TS - 2 x 0.7 W BTL audio amplifier
TDA8540 - 4 X 4 video switch matrix
TDA8541 - 1 W BTL audio amplifier
TDA8543 - 2 W BTL audio amplifier
TDA8547 - 2 x 1 W BTL audio amplifier with output channel switching

Published: Apr 16, 2005 |