NCP1595C Datasheet - ON Semiconductor

NCP1595C Current Mode PWM Converter

Pin No Symbol 1 FB 2 GND 3 LX 4 VCCP 5 VCC 6 NC EN EP PAD Figure 1. Block Diagram Description Feedback input pin of the Error Amplifier. Connect a resistor divider from the converter’s output voltage to this pin to set the converter’s output voltage. Ground pin. Connect to thermal pad. The dr.

NCP1595, NCP1595A, NCP1595C Buck Regulator- Synchronous 1 MHz, 1.5 A The NCP1595/A/C family are fixed 1 MHz, high output current, synchronous PWM converters that integrate a low resistance, high side P channel MOSFET and a low side N channel MOSFET. The NCP1595/A/C utilizes current mode control to provide fast transient response and excellent loop stability. It regulates input voltages from 4.0 V to 5.5 V down to an output voltage as low a.

NCP1595C Features

* include cycle

* by

* cycle current limiting, short

* circuit protection and thermal shutdown. Features

* Input Voltage Range: from 4.0 V to 5.5 V

* Internal 140 mW High

* Side Switching P

* Channel MOSFET and 90 mW Low

* Side N

* Channel MOSF

NCP1595C Datasheet (560.76 KB)