NCV1406 Datasheet - ON Semiconductor

NCV1406 PFM Step-Up DC-DC Converter

Pin Symbol Description 1 CE Chip Enable Pin (1) The chip is enabled if a voltage which is equal to or greater than 0.9 V is applied. (2) The chip is disabled if a voltage which is less than 0.3 V is applied. (3) The chip will be enabled if it is left floating. 2 FB Output feedback voltage. Conne.

NCP1406, NCV1406 Boost Converter - PFM, DC-DC 25 V, 25 mA The NCP1406 is a monolithic step up DC DC converter operating in a Pulse Frequency Modulation (PFM) scheme with constant peak current control. It integrates a 0.8 A, 0.7 W internal power switch and sensing resistor to monitor inductor current. This control scheme maintains high efficiencies over the entire load current range. The wide input voltage range, from 1.4V to 5.5 V, enables the user to operate the device from a L.

NCV1406 Features

* 87% Efficiency at VOUT = 25 V, IOUT = 25 mA, VIN = 5 V

* Adjustable Output Voltage up to 25 V

* 0.8 A, 26 V Internal Power Switch

* Operating Input Voltage from 1.4 V to 5.5 V

* Low Startup Voltage of 1.8 V Typical at No Load

* Low Operating Current

NCV1406 Datasheet (223.65 KB)