NCV4299A - 150mA Low-Dropout Voltage Regulator

ON Semiconductor

NCV4299A Datasheet Preview — Preview of NCV4299A PDF

Datasheet Details

Part number	NCV4299A
Manufacturer	ON Semiconductor ↗
File Size	341.32 KB
Description	150mA Low-Dropout Voltage Regulator
Datasheet	NCV4299A-ONSemiconductor.pdf

NCV4299A Product details

Description

Pin No. 14 TSSOP 14 Symbol Description 1 1 RADJ Reset Adjust.Use resistor divider to Q to adjust reset threshold lower.Connect to GND if not used.2 3 D Reset Delay.Connect external capacitor to ground to set delay time.3 4 GND Ground 4 GND Ground 5 GND Ground 6 5 INH Inhibit.Connect to I if not needed.A high turns the regulator on.Use a low pass filter if transients with slew rate in excess of 10 V/ms may be present o

Features

microprocessor interfaces including an adjustable reset output and adjustable system monitor to provide shutdown early warning. An inhibit function is available. With inhibit active, the regulator turns off and the device consumes less than 1.0 mA of quiescent current. The part can withstand load dump transients making it suitable for use in automotive environments. Features.
5.0 V, 3.3 V ±2%, 150 mA.
Extremely Low Current Consumption.
65 mA (Typ) in the ON Mode.

📁 NCV4299A Similar Datasheet

NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
NCV2902 - Single Supply Quad Operational Amplifiers (ON)
NCV3025833 - Smart Power Stage (onsemi)
NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
NCV551 - Low-Dropout Voltage Regulator (ON)
NCV70628 - Micro-stepping Motor Driver (onsemi)
NCV7383 - Transceiver (ON Semiconducto)

Other Datasheets by ON Semiconductor

NCV4299 - Low-Dropout Voltage Regulator
NCV4299C - 150mA Low-Dropout Voltage Regulator
NCV4290 - 450mA Low Drop Voltage Regulator
NCV4294C - Low Drop Voltage Regulator
NCV4296-2C - Voltage Regulator
NCV4250-2C - Low Dropout Voltage Tracking Regulator

Published: Aug 17, 2015 |