M29W200BB - 2 Mbit 256Kb x8 or 128Kb x16 / Boot Block Low Voltage Single Supply Flash Memory
The M29W200B is a 2 Mbit (256Kb x8 or 128Kb x16) non-volatile memory that can be read, erased and reprogrammed.
These operations can be performed using a single low voltage (2.7 to 3.6V) supply.
On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.
M29W200BT M29W200BB 2 Mbit (256Kb x8 or 128Kb x16, Boot Block) Low Voltage Single Supply Flash Memory PRELIMINARY DATA s SINGLE 2.7 to 3.6V SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 55ns PROGRAMMING TIME 10µs per Byte/Word typical 7 MEMORY BLOCKS 1 Boot Block (Top or Bottom Location) 2 Parameter and 4 Main Blocks 1 44 s s s s PROGRAM/ERASE CONTROLLER Embedded Byte/Word Program algorithm Embedded Multi-Block/Chip Eras
M29W200BB Features
* operations from accidentally damaging the data during power up, power down and power surges. If the Program/ Erase Controller is programming or