Description
Serial Clock (SCL) The SCL input is used to clock data into the device on the rising edge and to clock data out of the device on the falling edge.
Features
- Data EEPROM internally organized as 4096 bytes and 128 pages × 32 bytes.
- Page Protection Mode for protecting the EEPROM against unintended data changes (SLx 24C32/P types only).
- Low power CMOS.
- VCC = 2.7 to 5.5 V operation.
- Two wire serial interface bus, I2C-Bus compatible.
- Three chip select pins to address 8 devices.
- Filtered inputs for noise suppression with Schmitt trigger.
- Clock frequency up to 400 kHz.
- High pr.