ADCMP602 Datasheet PDF | Analog Devices

Analog Devices ADCMP602

the ADCMP602 support a wide input signal range while still allowing independent output swing control and power savings. The TTL-/CMOS-compatible output stage is designed to drive up to 5 pF with full timing specs and to degrade in a graceful and linear fashion as additional capacitance is added. The comparator input stage offers robust protection against large input overdrive, and the outputs do not phase reverse when the valid input signal range is exceeded.

Part No.	ADCMP602
Datasheet	ADCMP602 Download
Manufacturer	Analog Devices
Description	Single-Supply TTL/CMOS Comparator
Buy	Stock & Price

FEATURES

Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparators ADCMP600/ADCMP601/ADCMP602 FUNCTIONAL BLOCK DIAGRAM NONINVERTING INPUT 10 mV sensitivity rail to rail at VCC = 2.5 V Input common-mode voltage from −0.2 V to VCC + 0.2 V Low glitch CMOS-/TTL-compatible output stage 3 ns propagation delay 15 mW at 3.3 V Shutdown pin Single-pin control for programmable hysteresis and latch Power supply rejection > 60 dB Improved replacement for MAX999 −40°C to +125°C operation INVERTING INPUT ADCMP600/ ADCMP601/ ADCMP602 Q OUTPUT LE/HYS (Except ADCMP600) SDN (ADCMP602 Only) Figure 1.

APPLICATIONS

High speed instrumentation Clock and data signal restoration Logic level shifting or translation Pulse spectroscopy High speed line receivers Threshold detection Peak and zero-crossing detectors High speed trigger circuitry Pulse-width modulators Current-/voltage-controlled oscillators Automatic test equipment (ATE)

GENERAL DESCRIPTION

The ADCMP600, ADCMP601, and ADCMP602 are very fast comparators fabricated on Analog Devices’ proprietary XFCB2 process.