Datasheet4U Logo Datasheet4U.com

AP22818 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

This page provides the datasheet information for the AP22818, a member of the AP22816 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH family.

Datasheet Summary

Description

The DIODES™ AP22816/17/18 is a single-channel, current-limited, integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications.

The family of devices complies with USB standards and is available with both polarities of enable input.

Features

  • Input Voltage Range: 2.7V to 5.5V.
  • 75mΩ On-resistance.
  • Built-in Soft-start with 0.6ms Typical Rise Time.
  • Fault Report (FLG) with Blanking Time (6ms Typ. ).
  • ESD Protection: 2kV HBM, 500V CDM.
  • Logic Level Enable Pin: Available with Active-high or Active-low Versions.
  • Protections:.
  • Overcurrent Protection with Auto Recovery.
  • Short-Circuit Protection with Auto Recovery.
  • Overtemperature Protection with Auto Recovery.
  • Output Reverse Current / Volta.

📥 Download Datasheet

Datasheet preview – AP22818

Datasheet Details

Part number AP22818
Manufacturer DIODES
File Size 1.29 MB
Description 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
Datasheet download datasheet AP22818 Datasheet
Additional preview pages of the AP22818 datasheet.

📁 Similar Datasheet

  • AP2201 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2201 - PFM Control Step-Up Switching Regulator (Chipown)
  • AP2202 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2203 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2204 - WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR (BCD Semiconductor)
  • AP2210 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2213 - LOW NOISE LDO REGULATOR (BCD Semiconductor)
  • AP2218 - LOW DROPOUT LINEAR REGULATOR (BCD Semiconductor)
  • AP22N13GH-HF - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
  • AP22T03GH-HF - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
Other Datasheets by DIODES
  • AP2281 - Single Slew Rate Controlled Load Switch
  • AP22811 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP22814 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP22815 - SINGLE CHANNEL POWER DISTRIBUTION SWITCH
  • AP22816 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP22817 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP2280 - Single Channel Slew Rate Controlled Load Switch
  • AP22800 - 5V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH

Full PDF Text Transcription

Click to expand full text
AP22816/17/18 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH Description The DIODES™ AP22816/17/18 is a single-channel, current-limited, integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and is available with both polarities of enable input. The device has fast short-circuit response time for improved overall system robustness, and has an integrated output discharge function to ensure completely controlled discharging of the output voltage capacitor.
Published: |