Datasheet4U Logo Datasheet4U.com

MBM29BS12DH15 - BURST MODE FLASH MEMORY CMOS 128M (8M X 16) BIT

General Description

The MBM29BS/FS12DH is a 128 Mbit, 1.8 Volt-only, Burst mode and dual operation Flash memory organized as 8M words of 16 bits each.

The device offered in a 80-ball FBGA package.

This device is designed to be programmed in-system with the standard system 1.8 V VCC supply.

Key Features

  • a sector erase architecture. The sector mode allows each sector to be erased and reprogrammed without affecting other sectors. The device is erased when shipped from the factory. The Enhanced VI/O (VCCQ) feature allows the output voltage generated on the device to be determined based on the VI/O level. This feature allows this device to operate in the 1.8 V I/O environment, driving and receiving signals to and from other 1.8 V devices on the same bus. The device features single 1.8 V power suppl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MBM29BS32LF-18 BURST MODE FLASH MEMORY CMOS 32M (2M x 16) BIT Fujitsu
MBM29BS32LF-25 BURST MODE FLASH MEMORY CMOS 32M (2M x 16) BIT Fujitsu
MBM29BT32LF-18 BURST MODE FLASH MEMORY CMOS 32M (2M x 16) BIT Fujitsu
MBM29BT32LF-25 BURST MODE FLASH MEMORY CMOS 32M (2M x 16) BIT Fujitsu
MBM29DL161BD-70 FLASH MEMORY CMOS 16M (2M x 8/1M x 16) BIT Fujitsu

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
MBM29BS12DH BURST MODE FLASH MEMORY
MBM29BS32LF18 BURST MODE FLASH MEMORY
MBM29BS32LF25 BURST MODE FLASH MEMORY CMOS 32M (2M X 16) BIT
MBM29DL161BD (MBM29DL16xTD/BD) FLASH MEMORY CMOS 16M (2M X 8/1M X 16) BIT
MBM29DL161BE (MBM29DL16xTE/BE) 16M (2MX8/1MX16) BIT Dual Operation

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS05-20910-2E BURST MODE FLASH MEMORY CMOS 128M (8M × 16) BIT MBM29BS/FS12DH 15 s DESCRIPTION The MBM29BS/FS12DH is a 128 Mbit, 1.8 Volt-only, Burst mode and dual operation Flash memory organized as 8M words of 16 bits each. The device offered in a 80-ball FBGA package. This device is designed to be programmed in-system with the standard system 1.8 V VCC supply. 12.0 V VPP and 5.0 V VCC are not required for write or erase operations. The device can also be programmed in standard EPROM programmers. (Continued) s PRODUCT LINE UP Part No.