Pin definition: 1
drain 2
source 3
Kelvin sense contact 4
gate
Type AIMZH120R040M1T
Package PG-TO247-4-STD-NT6.7
Marking A12M1T040
Datasheet www.infineon.com
Please read the sections "Important notice" and "Warnings" at the end of this document
Revision
Key Features
PG-TO247-4-STD-NT6.7.
VDSS = 1200 V at Tvj = -55175°C.
IDDC = 55 A at TC = 25°C.
RDS(on) = 40 mΩ at VGS = 20 V, Tvj = 25°C.
New performance-optimized chip technology (Gen1p) with improved RDSon.
A FOM.
Increased recommended turn-on voltage (VGS(on) = 20 V) for lower RDS(on).
Best in class switching energy for lower switching losses and reduced cooling efforts.
Lowest device capacitances for higher switching speeds and higher p.
Full PDF Text Transcription for AIMZH120R040M1T (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
AIMZH120R040M1T. For precise diagrams, and layout, please refer to the original PDF.
AIMZH120R040M1T CoolSiC™ 1200 V SiC Trench MOSFET Final datasheet CoolSiC™ 1200 V SiC Trench MOSFET Features PG-TO247-4-STD-NT6.7 • VDSS = 1200 V at Tvj = -55...175°C • I...
View more extracted text
Features PG-TO247-4-STD-NT6.7 • VDSS = 1200 V at Tvj = -55...175°C • IDDC = 55 A at TC = 25°C • RDS(on) = 40 mΩ at VGS = 20 V, Tvj = 25°C • New performance-optimized chip technology (Gen1p) with improved RDSon* A FOM • Increased recommended turn-on voltage (VGS(on) = 20 V) for lower RDS(on) • Best in class switching energy for lower switching losses and reduced cooling efforts • Lowest device capacitances for higher switching speeds and higher power density 2021-10-27 restricted • A combination of low Crss/Ciss ratio and high VGS(th) to avoid parasitic turn-on and enable unipolar gate driving • Reduced total gate charge QG