AN8016NSH - Single-channel 1.8-volt step-up DC-DC converter controller

Product Overview

Panasonic Semiconductor

Part number	AN8016NSH
Manufacturer	Panasonic Semiconductor
File Size	134.62 KB
Description	Single-channel 1.8-volt step-up DC-DC converter controller
Datasheet	AN8016NSH Datasheet
Additional preview pages of the AN8016NSH datasheet.

Pin No. S.C.P.

a low minimum operating voltage of 1.8 V, and due to being provided in a 10-pin surface mount package with a 0.5 mm lead pitch, is optimal for use in miniature high-efficiency power supplies for portable equipment. Unit: mm 0.5 5 6 0.1±0.1 0.625±0.10.
Wide operating supply voltage range: 1.8 V to 14 V 6.3±0.30.
High-precision reference voltage circuit: 1.27 V (allowance: ± 3%) SSOP010-P-0225.
Supports control over a wide output frequency range: 20 kHz to 1 MHz.

📁 Similar Datasheet

AN80196CA - ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 (Intel Corporation)
AN80196CB - ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 (Intel Corporation)
AN804 - P-Channel MOSFET (Vishay Siliconix)
AN805 - PWM Optimized Power MOSFET (Vishay Siliconix)
AN8053N - 1.0W Power Amplifier (Matsushita)
AN809 - Digitally Addressable DALI Dimming Ballast (Microchip)
AN8096JC - (AN8x9xJC) Advanced 16-Bit Microcontroller (Intel)
AN809xJC - (AN8x9xJC) Advanced 16-Bit Microcontroller (Intel)

Other Datasheets by Panasonic Semiconductor

AN8016 - Single-channel 1.8-volt step-up DC-DC converter controller
AN8010 - 3-pin/ positive output/ low dropout voltage regulator
AN8010M - 3-pin/ positive output/ low dropout voltage regulator
AN8011S - 2-channel step-down/ step-up/ or inverting use DC-DC converter controller
AN8013SH - Single-channel step-up or step-down DC-DC converter controller
AN8014 - Step-down/ step-up/ or inverting DC-DC converter controller

Published: Mar 26, 2005 |