Datasheet4U Logo Datasheet4U.com

PE4256 - SPDT CATV UltraCMOS Switch

Description

The PE4256 is an UltraCMOS® Switch designed for CATV applications, covering a broad frequency range from 5 MHz up to 3 GHz.

This single-supply SPDT switch integrates a two-pin CMOS control interface.

Features

  •  75Ω characteristic impedance.
  •  Integrated 75Ω terminations.
  •  CTB performance of.
  • 90 dBc.
  •  High isolation 65 dB at 1000 MHz.
  •  Low insertion loss: typically 0.5 dB at 5 MHz, 0.9 dB at 1000 MHz.
  •  High input IP3: >50 dBm.
  •  CMOS two-pin control.
  •  Single +3 volt supply operation.
  •  Low current consumption: 8 μA.
  •  Unique all off terminated mode.
  •  4 x 4 mm QFN package Figure 2. Package Type 20-lead 4 x 4 mm QFN DOC-35201 Table 1. Electri.

📥 Download Datasheet

Datasheet preview – PE4256

Datasheet Details

Part number PE4256
Manufacturer Peregrine Semiconductor
File Size 628.52 KB
Description SPDT CATV UltraCMOS Switch
Datasheet download datasheet PE4256 Datasheet
Additional preview pages of the PE4256 datasheet.

📁 Similar Datasheet

  • PE42512 - RF Switch (pSemi)
  • PE42445 - High Isolation UltraCMOS SP4T RF Switch (pSemi)
  • PE42482 - SP8T RF Switch (pSemi)
  • PE42726 - SPDT RF Switch (pSemi)
  • PE4290X - (PE-xxxxX) General Purpose Transformers (Pulse)
  • PE4005 - RF CONNECTOR (Pasternack Enterprises)
  • PE4013S - N-Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE4013SA - N-Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE4025KC - N and P Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE40F - THYRISTOR MODULE (SanRex Corporation)
Other Datasheets by Peregrine Semiconductor

Full PDF Text Transcription

Click to expand full text
Product Description The PE4256 is an UltraCMOS® Switch designed for CATV applications, covering a broad frequency range from 5 MHz up to 3 GHz. This single-supply SPDT switch integrates a two-pin CMOS control interface. It also provides low insertion loss with extremely low bias requirements while operating on a single 3volt supply. In a typical CATV application, the PE4256 provides for a cost effective and manufacturable solution when compared to mechanical relays. Figure 1. Functional Diagram Product Specification PE4256 75 Ω SPDT CATV UltraCMOS® Switch 5 MHz–3 GHz Features  75Ω characteristic impedance  Integrated 75Ω terminations  CTB performance of –90 dBc  High isolation 65 dB at 1000 MHz  Low insertion loss: typically 0.5 dB at 5 MHz, 0.
Published: |