Datasheet4U Logo Datasheet4U.com

M5913 - COMBINED SINGLE CHIP PCM CODEC AND FILTER

General Description

The M5913 is fully integrated PCM (pulse code modulation) codecs and transmit/receive filter using CMOS silicon gate technology.

Key Features

  • The combo-chip can be powered up by pulsing FSX and/or FSR while a TTL high voltage is applied to PDN, provided that all clocks and supplies are connected. The M5913 has internal resets on power up (or when VBB or VCC are re-applied) in order to ensure validity of the digital outputs and thereby maintain integrity of the PCM highway. On the transmit channel, digital outputs DX and TS X are held in a high impedance state for approximately four frames (500µs) after power up or.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M5913 COMBINED SINGLE CHIP PCM CODEC AND FILTER SYNCHRONOUS CLOCKS ONLY AT&T D3/D4 AND CCITT COMPATIBLE TWO TIMING MODES: FIXED DATA RATE MODE 1.536MHz, 1.544MHz, 2.048MHz VARIABLE DATA MODE: 64KHz - 4.096MHz PIN SELECTABLE µ-LAW OR A-LAW OPERATION NO EXTERNAL COMPONENTS FOR SAMPLE-AND-HOLD AND AUTO ZERO FUNCTIONS LOW POWER DISSIPATION: 0.5mW POWER DOWN 70mW OPERATING EXCELLENT POWER SUPPLY REJECTION DESCRIPTION The M5913 is fully integrated PCM (pulse code modulation) codecs and transmit/receive filter using CMOS silicon gate technology. The primary applications for the M5913 are telephone systems : - Switching - M5913-Digital PBX’s and Central BLOCK DIAGRAM DIP 20 ORDERING NUMBER: M5913B1 Office Switching Systems - Concentration - M5913 Subscriber Carrier and Concentrators.