74HC164 Datasheet

The 74HC164 is a 8-BIT PARALLEL-OUT SERIAL SHIFT REGISTERS.

Datasheet4U Logo
Part Number74HC164
ManufacturerDiodes Incorporated
Overview The 74HC164 is a serial input 8-bit edge-triggered shift register that has outputs from each of eight stages. SERIAL DATA INPUT PINS The serial input data is entered at pin SDA or pin SDB as these are.
* Wide Supply Voltage Range from 2.0V to 6.0V
* Sinks or Sources 4mA at VCC = 4.5V
* CMOS Low Power Consumption
* Schmitt Trigger Action at all Inputs
* ESD Protection Exceeds JESD 22
* 200-V Machine Model (A115)
* 2000-V Human Body Model (A114)
* Exceeds 1000-V Charged Device Model (C101)
* Range o.
Part Number74HC164
Description8-bit serial-in / parallel-out shift register
ManufacturerNXP Semiconductors
Overview The 74HC164; 74HCT164 is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel data outputs (Q0 to Q7). Data is entered serially thro. two serial data inputs (DSA and DSB), eight parallel data outputs (Q0 to Q7). Data is entered serially through DSA or DSB and either input can be used as an active HIGH enable for data entry through the other input. Data is shifted on the LOW-to-HIGH transitions of the clock (CP) input. A LOW on the.
Part Number74HC164
Description8-Bit Parallel-Out Serial Shift Registers
ManufacturerTexas Instruments
Overview These 8-bit shift registers feature AND-gated serial inputs and an asynchronous clear (CLR) input. The gated serial (A and B) inputs permit complete control over incoming data; a low at either input i.
*1 Wide Operating Voltage Range of 2 V to 6 V
* Outputs Can Drive Up to 10 LSTTL Loads
* Low Power Consumption, 80-μA Maximum ICC
* Typical tpd = 20 ns
* ±4-mA Output Drive at 5 V
* Low Input Current of 1-μA Maximum
* AND-Gated (Enable/Disable) Serial Inputs
* Fully Buffered Clock and Serial Inputs .
Part Number74HC164
Description8-bit Parallel-out Shift Register
ManufacturerHitachi Semiconductor
Overview This 8-bit shift register has gated serial inputs and clear. Each register bit is a D-type master/slave flipflop. Inputs A & B permit complete control over the incoming data. A low at either or both i.
*
*
*
*
* High Speed Operation: tpd (Clock to Q) = 14.5 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 4 µA max Function Table Inputs Clear L H H H H Clock X A X X L X .