| Part Number | 74HCT173 Datasheet |
|---|---|
| Manufacturer | Philips Semiconductors |
| Overview |
The 74HC/HCT173 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT173 are 4-bit p.
* Gated input enable for hold (do nothing) mode * Gated output enable control * Edge-triggered D-type register * Asynchronous master reset * Output capability: bus driver * ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT173 are high-speed Si-gate CMOS devices and are pin compatible with low power. |
74HCT173 Datasheet PDF
The 74HCT173 is a Quad D-type flip-flop.
| Part Number | 74HCT173 Datasheet |
|---|---|
| Description | Quad D-type flip-flop |
| Manufacturer | Nexperia |
| Overview | The 74HC173; 74HCT173 is a quad positive-edge triggered D-type flip-flop. The device features clock (CP), master reset (MR), two input enable (E1, E2) and two output enable (OE1, OE2) inputs. When the. clock (CP), master reset (MR), two input enable (E1, E2) and two output enable (OE1, OE2) inputs. When the input enables are LOW, the outputs Qn will assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on . |
| Part Number | 74HCT173 Datasheet |
|---|---|
| Description | Quad D-Type Flip-Flop |
| Manufacturer | Texas Instruments |
| Overview |
The CDx4HC173 and CDx4HCT173 contains four independent D-type flip-flops with shared clock (CP), reset (MR), and data enable (E1, E2) pins.
PART NUMBER
Device Information
PACKAGE(1) BODY SIZE (NOM).
* Three-state buffered outputs * Gated input and output enables * Fanout (over temperature range) * Standard outputs : 10 LSTTL loads * Bus driver outputs : 15 LSTTL loads * Wide Operating Temperature Range : -55°C to 125°C * Balanced propagation delay and transition times * Significant power and re. |