Datasheet4U Logo Datasheet4U.com

NTB0101A - Auto direction sensing dual supply

Description

The NTB0101A is a 1-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation.

It consists of two 1-bit I/O ports (A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)).

Features

  • Wide supply voltage range:.
  • VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V.
  • IOFF circuitry provides partial power-down mode operation.
  • Inputs accept voltages up to 5.5 V.
  • ESD protection:.
  • HBM JESD22-A114E Class 2 exceeds 2500 V for port A.
  • HBM JESD22-A114E Class 3B exceeds 15000 V for port B.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM JESD22-C101E exceeds 1500 V.
  • Latch-up performance exceeds 100 mA per JESD 78B Class II.
  • Specified from 40 C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTB011N15MC N-Channel MOSFET ON Semiconductor
NTB082N65S3F Power MOSFET ON Semiconductor
NTB082N65S3F N-Channel MOSFET INCHANGE
NTB10N40 Power MOSFET ON Semiconductor
NTB125N02R Power MOSFET ON

Other Datasheets by NXP Semiconductors

Part Number Description
NTB0101 Dual supply translating transceiver
NTB0102 Dual supply translating transceiver
NTB0102-Q100 Dual supply translating transceiver
NTB0104 Dual supply translating transceiver
NTB0104-Q100 Dual supply translating transceiver

Full PDF Text Transcription

Click to expand full text
NTB0101A Auto direction sensing dual supply Rev. 1 — 14 July 2015 Product data sheet 1. General description The NTB0101A is a 1-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It consists of two 1-bit I/O ports (A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.2 V and 3.6 V. VCC(B) can be supplied at any voltage between 1.65 V and 5.5 V. This flexibility allows translation between any of the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B). A HIGH level at pin OE causes the outputs to assume a high-impedance OFF-state.
Published: |