Datasheet4U Logo Datasheet4U.com

TPD1044F - Low-Side Switch

General Description

The TPD1044F is a low-side switch.

The IC has a vertical MOSFET output which can be directly driven from a CMOS or TTL logic circuit (e.g., an MPU).

The IC is equipped with intelligent self-protection functions.

Key Features

  • A monolithic IC with a new structure combining a control block and a vertical MOSFET on single chip.
  • Can directly drive a power load from a CMOS or TTL logic IC.
  • Built-in protection circuits against overvoltage (active clamp), overtemperature (thermal shutdown), and overcurrent (current limiter).
  • Low Drain-Source ON-resistance: RDS (ON) = 0.6 Ω (max) (@VIN = 5 V, ID = 0.5 A, Tch = 25 °C).
  • Low Drain cut-off Current: IDSS = 10 μA (max) (@VIN = 0 V, VDS = 30 V, Tch = 25.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPD1039F Low-Side Power Switch Toshiba
TPD1052F Silicon Monolithic Power MOS Toshiba
TPD1053F Silicon Monolithic Power MOS Toshiba
TPD1054F Low-Side Switch Toshiba
TPD1055FA High side power switch Toshiba

Other Datasheets by Toshiba

Part Number Description
TPD1042F Silicon Monolithic Power MOS
TPD1045F Silicon Monolithic Power MOS
TPD1046F 2-IN-1 Low-Side Power Switch
TPD1008SA High-side Power Switch
TPD1011S High-side Power Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Toshiba Intelligent Power Device Silicon Monolithic MOS Integrated Circuit TPD1044F Low-Side Switch for Motor, Solenoid and Lamp Drive 1. Description The TPD1044F is a low-side switch. The IC has a vertical MOSFET output which can be directly driven from a CMOS or TTL logic circuit (e.g., an MPU). The IC is equipped with intelligent self-protection functions. TPD1044F 2. Applications Motor drive, solenoid drive, lamp drive. Weight: 0.017 g (typ.) 3. Features ● A monolithic IC with a new structure combining a control block and a vertical MOSFET on single chip. ● Can directly drive a power load from a CMOS or TTL logic IC. ● Built-in protection circuits against overvoltage (active clamp), overtemperature (thermal shutdown), and overcurrent (current limiter).