Datasheet Details
| Part number | CDCVF25084 |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 422.53 KB |
| Description | 3.3-V 1:8 ZERO DELAY x4 CLOCK MULTIPLIER |
| Datasheet | CDCVF25084-etcTI.pdf |
|
|
Overview: CDCVF25084 3.3-V 1:8 ZERO DELAY (PLL) x4 CLOCK MULTIPLIER D Phase-Locked Loop-Based Multiplier by Four D Input Frequency Range: 2.5 MHz to 45 MHz D Output Frequency Range: 10 MHz to 180 MHz D LVCMOS/LVTTL I/O Compatible D Low Jitter (Cycle-Cycle): ±120 ps Over the Range 75 MHz to 180 MHz D Distributes One Clock Input to Two Banks of Four Outputs D Auto Frequency Detection to Disable Device (Power-Down Mode) D Operates From Single 3.
| Part number | CDCVF25084 |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 422.53 KB |
| Description | 3.3-V 1:8 ZERO DELAY x4 CLOCK MULTIPLIER |
| Datasheet | CDCVF25084-etcTI.pdf |
|
|
|
The CDCVF25084 is a high-performance, low-skew, low-jitter, phase-lock loop clock multiplier.
It uses a PLL to precisely align, in both frequency and phase, the output clocks to the input clock signal including a multiplication factor of four.
The CDCVF25084 operates from a nominal supply voltage of 3.3 V.
Compare CDCVF25084 distributor prices and check real-time stock availability from major suppliers. Prices and inventory may vary by region and order quantity.
| Part Number | Description |
|---|---|
| CDCVF25081 | 3.3-V Phased-Lock Loop Clock Driver |
| CDCVF2505 | 3.3-V Clock Phase-Lock Loop Clock Driver |
| CDCVF2505-Q1 | 3.3-V CLOCK PHASE-LOCKED LOOP CLOCK DRIVER |
| CDCVF2509 | 3.3-V PHASE-LOCK LOOP CLOCK DRIVER |
| CDCVF2509A | 3.3-V PHASE-LOCK LOOP CLOCK DRIVER |
| CDCVF2510 | 3.3-V PHASE-LOCK LOOP CLOCK DRIVER |
| CDCVF2510A | 3.3-V PHASE-LOCK LOOP CLOCK DRIVER |
| CDCVF2310 | 2.5-V to 3.3-V High-Performance Clock Buffer |
| CDCVF2310-EP | 2.5-V TO 3.3-V HIGH-PERFORMANCE CLOCK BUFFER |
| CDCVF111 | 1:9 DIFFERENTIAL LVPECL CLOCK DRIVER |