Datasheet4U Logo Datasheet4U.com

CBT3253 - Dual 1-of-4 FET multiplexer/demultiplexer

Description

The CBT3253 is a dual 1-of-4 high-speed TTL-compatible FET multiplexer/demultiplexer.

The low ON-resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

Features

  • 5 Ω switch connection between two ports.
  • Direct interface with TTL levels.
  • Overvoltage tolerant control inputs to 5.5 V.
  • Minimal propagation delay through the switch.
  • Latch-up protection exceeds 100 mA per JEDEC standard JESD78 class II level A.
  • ESD protection:.
  • HBM JESD22-A114E exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM JESD22-C101C exceeds 1000 V.
  • Specified from -40 °C to +85 °C 3. Ordering inf.

📥 Download Datasheet

Datasheet Details

Part number CBT3253
Manufacturer Nexperia
File Size 221.79 KB
Description Dual 1-of-4 FET multiplexer/demultiplexer
Datasheet download datasheet CBT3253 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CBT3253 Dual 1-of-4 FET multiplexer/demultiplexer NXP
CBT3253A Dual 1-of-4 FET multiplexer/demultiplexer NXP
CBT3251 1-of-8 FET multiplexer/demultiplexer NXP Semiconductors
CBT3257 Quad 1-of-2 multiplexer/demultiplexer NXP
CBT3257A Quad 1-of-2 multiplexer/demultiplexer NXP

Other Datasheets by Nexperia

Part Number Description
CBT3253A Dual 1-of-4 FET multiplexer/demultiplexer
CBT3251 1-of-8 FET multiplexer/demultiplexer
CBT3257A Quad 1-of-2 multiplexer/demultiplexer
CBT3244A Octal bus switch
CBT3245A Octal bus switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CBT3253 Dual 1-of-4 FET multiplexer/demultiplexer Rev. 4 — 23 March 2021 Product data sheet 1. General description The CBT3253 is a dual 1-of-4 high-speed TTL-compatible FET multiplexer/demultiplexer. The low ON-resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The select control inputs (S0, S1) can select the data path, when both output enable inputs (1OE, 2OE) are LOW. When nOE is HIGH, the switch terminals are in the high impedance OFF-state, independent of S0 and S1. 2. Features and benefits • 5 Ω switch connection between two ports • Direct interface with TTL levels • Overvoltage tolerant control inputs to 5.
Published: |