Part number:
GS9009
Manufacturer:
Gennum
File Size:
128.37 KB
Description:
Cable driver.
* two output pairs, adjustable from 0 to 1100 mVp-p into 75 Ω loads
* nominal 600 ps rise and fall times
* accepts SMPTE and standard ECL input levels
* operates from a single +5 or -5 volt supply
* on-chip DC restoration for low jitter
* 250 mW power
GS9009
Gennum
128.37 KB
Cable driver.
📁 Related Datasheet
GS9000 - Serial Digital Decoder
(Gennum)
w
w
a D . w
S a t
e e h
U 4 t
m o .c
w
w
w
.D
t a
S a
e h
t e
U 4
.c
m o
w
w
w
.D
at
h S a
t e e
4U
.
m o c
.
GS9000C - Serial Digital Decoder
(Gennum)
GS9000C
GENLINX™ GS9000C
Serial Digital Decoder
FEATURES
• fully patible with SMPTE 259M
• decodes 8 and 10 bit serial digital signals for data r.
GS9000D - Serial Digital Decoder
(Gennum)
GS9000D
GENLINX II ™ GS9000D
Serial Digital Decoder
FEATURES • fully patible with SMPTE 259M-ABC • decodes 8 and 10 bit serial digital signals fo.
GS9001 - EDH Coprocessor
(Gennum)
GENLINX™ GS9001
EDH Coprocessor
FEATURES
DESCRIPTION
DATA SHEET
• Error Detection and Handling (EDH) according to SMPTE RP165
• EDH insertion and .
GS9007 - Quad Serial Digital Cable Driver
(Gennum)
GENLINX™ GS9007 Quad
Serial Digital Cable Driver
FEATURES
• two output pairs (four outputs total) meeting SMPTE 259M
• nominal 550 ps rise and fall.
GS9008 - Cable Driver
(Gennum)
GENLINX™ GS9008 Cable Driver
with Two Adjustable Outputs
DATA SHEET
FEATURES
• two outputs, adjustable from 0 to 1100 mVp-p into 75 Ω loads
• nominal.
GS9008A - Cable Driver
(Gennum)
GS9008A
NOT RECOMMENDED FOR NEW DESIGNS
GENLINX ™ GS9008A Cable Driver with Two Adjustable Outputs
KEY FEATURES • two output pairs, adjustable from.
GS9010A - Automatic Tuning Subsystem
(Gennum)
GENLINX™ GS9010A Serial Digital
Automatic Tuning Subsystem
FEATURES • when used with the GS9005A or GS9015A and the
GS9000B or GS9000S, the GS9010A: .
