* m preheating to soldering, the maximum temperature gradient shall be 5°C or less.
* After soldering has been completed, the device should be allowed to cool naturally for at least three minutes. Gradual cooling should be used as the use of forced cooling will increase the temperature gradien
MMBT2222ALT1 Datasheet (253.60 KB)
MMBT2222ALT1
Motorola
253.60 KB
General purpose transistors.
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MMBT2222LT1/D
General Purpose Transistors
NPN Silicon
1 BASE
COLLECTOR 3
MMBT2222LT1.
📁 Related Datasheet
MMBT2222ALT1 General Purpose Transistors (LRC)
MMBT2222ALT1 General Purpose Transistors (ON)
MMBT2222ALT1 General Purpose Transistor (WILLAS)
MMBT2222ALT1 General Purpose Transistors (ETL)
MMBT2222AL NPN GENERAL PURPOSE AMPLIFIER (UTC)
MMBT2222AL General Purpose Transistors (ON Semiconductor)
MMBT2222ALP4 NPN SMALL SIGNAL SURFACE MOUNT TRANSISTOR (Diodes)
MMBT2222A NPN Amplifier (GME)
MMBT2222A NPN Amplifier (MCC)
MMBT2222A NPN Transistor (CITC)
