NCP338 Datasheet - ON Semiconductor

NCP338 2A Ultra-Small Controlled Load Switch

Pin Name Pin Number Type IN A2, B2 POWER GND EN OUT C1 C2 A1, B1 POWER INPUT OUTPUT Description Load *switch input voltage; connect a 1 mF or greater ceramic capacitor from IN to GND as close as possible to the IC. Ground connection. Enable input, logic high turns on power switch. L.

NCP338 2A Ultra-Small Controlled Load Switch with Auto-discharge Path The NCP338 is very low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy. Indeed, due to a current consumption optimization with PMOS structure, leakage currents are eliminated by isolating connected IC on the battery when not used. Output discharge path is also embedded to eliminate residual voltages on the output rail. Proposed in a wide input voltage range from.

NCP338 Features

* 1.0 V

* 3.6 V Operating Range

* 16 mW P MOSFET at 3.6 V

* DC Current Up to 2 A

* Output Auto

* discharge

* Active High EN Pin

* WLCSP6 0.8 x 1.2 mm

* ESD Ratings: 6 kV HBM, 250 V MM

* This is a Pb

* Free Device Typ