M29W160BB - 16 Mbit 2Mb x8 or 1Mb x16 / Boot Block Low Voltage Single Supply Flash Memory
The M29W160B is a 16 Mbit (2Mb x8 or 1Mb x16) non-volatile memory that can be read, erased and reprogrammed.
These operations can be performed using a single low voltage (2.7 to 3.6V) supply.
On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.
The
M29W160BT M29W160BB 16 Mbit (2Mb x8 or 1Mb x16, Boot Block) Low Voltage Single Supply Flash Memory PRELIMINARY DATA s SINGLE 2.7 to 3.6V SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 70ns PROGRAMMING TIME 10µs per Byte/Word typical 35 MEMORY BLOCKS 1 Boot Block (Top or Bottom Location) 2 Parameter and 32 Main Blocks TSOP48 (N) 12 x 20mm 1 44 s s s SO44 (M) s PROGRAM/ERASE CONTROLLER Embedded Byte/Word Program algorithm
M29W160BB Features
* TE is High and references to the Address Inputs to include this pin when BYTE is Low except when stated explicitly otherwise. Chip Enable (E). The Ch
