* a 2 line control function which accommodates the use of multiple memory connection. The two line control function allows: a. the lowest possible memory power dissipation, b. complete assurance that output bus contention will not occur. For the most efficient use of these two control lines, E should
27C4001
112.13 KB
4 mbit 512kb x 8 uv eprom and otp eprom.
M27C4001
4 Mbit (512Kb x 8) UV EPROM and OTP EPROM
s
5V ± 10% SUPPLY VOLTAGE in READ OPERATION FAST ACCESS TIME: 35ns LOW POWER CONSUMPTION:
.
📁 Related Datasheet
27C4002 - 4 Mbit 256Kb x16 UV EPROM and OTP EPROM
(STMicroelectronics)
M27C4002
4 Mbit (256Kb x16) UV EPROM and OTP EPROM
5V ± 10% SUPPLY VOLTAGE in READ OPERATION FAST ACCESS TIME: 45ns LOW POWER CONSUMPTION: – Active Cu.
27C4096 - 256K X 16 ELECTRICALLY ERASABLE EPROM
(Winbond)
Preliminary W27C4096 256K × 16 ELECTRICALLY ERASABLE EPROM
GENERAL DESCRIPTION
The W27C4096 is a high speed, low power Electrically Erasable and Progr.
27C4096 - 4 Megabit (256 K x 16-Bit) CMOS EPROM
(Advanced Micro Devices)
.
27C4096 - 4-Megabit 256K x 16 OTP EPROM
(ATMEL)
AT27C4096
Features
• Fast Read Access Time - 55 ns • Low Power CMOS Operation •
– 100 µA Maximum Standby – 40 mA Maximum Active at 5 MHz JEDEC Standar.
27C4096 - 4M-BIT [512K x 8/256K x 16] CMOS EPROM
(Macronix International)
MX27C4100/27C4096
4M-BIT [512K x 8/256K x 16] CMOS EPROM
FEATURES
• 256K x 16 organization(MX27C4096, JEDEC pin • • • •
out) 512K x 8 or 256K x 16 or.
27C4100 - 4M-BIT [512K x 8/256K x 16] CMOS EPROM
(Macronix International)
MX27C4100/27C4096
4M-BIT [512K x 8/256K x 16] CMOS EPROM
FEATURES
• 256K x 16 organization(MX27C4096, JEDEC pin • • • •
out) 512K x 8 or 256K x 16 or.
27C010 - 1 /048 /576-Bit (128K x 8) High Performance CMOS EPROM
(Fairchild)
NM27C010 1,048,576-Bit (128K x 8) High Performance CMOS EPROM
October 1998
NM27C010 1,048,576-Bit (128K x 8) High Performance CMOS EPROM
General Des.
27C010 - 1 Megabit 128K x 8 OTP CMOS EPROM
(ATMEL)
AT27C010/L
Features
• • • • • • • • •
Fast Read Access Time - 45 ns Low Power CMOS Operation 100 µA max. Standby 25 mA max. Active at 5 MHz (AT27C01.
