Datasheet4U Logo Datasheet4U.com

CHA2193 - 20-30GHz Low Noise Amplifier

Datasheet Summary

Description

The CHA2193 is a three stages low noise amplifier.

It is designed for a wide range of applications, from military to commercial communication systems.

The backside of the chip is both RF and DC grounds.

Features

  • 2.0 dB noise figure.
  • 18 dB ± 1dB gain.
  • 8 dBm output power (-1dB gain comp. ).
  • Very good broadband input matching.
  • DC power consumption, 60mA @ 3.5V.
  • Chip size : 2.07 x 1.03 x 0.10 mm 20 18 Gain (dB) 16 14 12 10 8 6 4 NF (dB) 2 0 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Frequency ( GHz ) Typical on Wafer Measurements Main Characteristics Tamb. = 25°C Symbol Parameter Fop Operating frequency range G Small signal gain NF Noise figure P1dB Output power at 1dB g.

📥 Download Datasheet

Datasheet preview – CHA2193

Datasheet Details

Part number CHA2193
Manufacturer United Monolithic Semiconductors
File Size 139.85 KB
Description 20-30GHz Low Noise Amplifier
Datasheet download datasheet CHA2193 Datasheet
Additional preview pages of the CHA2193 datasheet.

📁 Similar Datasheet

  • CHA-20NF - (CHA-20xx) Coaxial Attenuators (Component General)
  • CHA-20NM - (CHA-20xx) Coaxial Attenuators (Component General)
  • CHA-20NMF - (CHA-20xx) Coaxial Attenuators (Component General)
  • CHA-20SF - (CHA-20xx) Coaxial Attenuators (Component General)
  • CHA-20SM - (CHA-20xx) Coaxial Attenuators (Component General)
  • CHA-20SMF - (CHA-20xx) Coaxial Attenuators (Component General)
  • CHA02016 - High Frequency 70-GHz Thin Film Chip Resistor (Vishay)
  • CHA0402 - High Frequency 70-GHz Thin Film Chip Resistor (Vishay)
  • CHA3080-98F - 71 ~ 76 GHz Medium Power Amplifier (UMS)
  • CHA441 - Hall-effect sensor (Cosemitech)
Other Datasheets by United Monolithic Semiconductors

Full PDF Text Transcription

Click to expand full text
CHA2193 RoHS COMPLIANT 20-30GHz Low Noise Amplifier GaAs Monolithic Microwave IC Description The CHA2193 is a three stages low noise amplifier. It is designed for a wide range of applications, from military to commercial communication systems. The backside of the chip is both RF and DC grounds. This helps simplify the assembly process. The circuit is manufactured with a pHEMT process, 0.25µm gate length, via holes through the substrate, air bridges and electron beam gate lithography. It is available in chip form. Main Features ■ 2.0 dB noise figure ■ 18 dB ± 1dB gain ■ 8 dBm output power (-1dB gain comp.) ■ Very good broadband input matching ■ DC power consumption, 60mA @ 3.5V ■ Chip size : 2.07 x 1.03 x 0.
Published: |