AT26F004 (ATMEL Corporation)
Serial Firmware DataFlash Memory
www.DataSheet4U.com
Features
• Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes 0 and 3
• 33 MHz Maximu
(3 views)
USBF8100 (Microchip)
USB Firmware Flash
USBF8100
USB Firmware Flash
Features
• Firmware Memory Companion for the USB249XXP Family of USB SmartHub™ Controllers: - Firmware features: - Power
(3 views)
AT49LH004 (ATMEL Corporation)
4-megabit Firmware Hub and Low-Pin Count Flash Memory
Features
• Complies with Intel Low-Pin Count (LPC) Interface Specification Revision 1.1 – Supports both Firmware Hub (FWH) and LPC Memory Read and Wri
(2 views)
49LF002 (Silicon Storage Technology Inc)
2 Mbit / 3 Mbit / 4 Mbit / 8 Mbit Firmware Hub
2 Mbit / 3 Mbit / 4 Mbit / 8 Mbit Firmware Hub
SST49LF002A / SST49LF003A / SST49LF004A / SST49LF008A
SST49LF002A / 003A / 004A / 008A2 Mb / 3 Mb / 4 M
(2 views)
TC9457F (Toshiba)
Firmware Built In Digital Servo
TC9457F
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC9457F
Firmware Built In Digital Servo
The TC9457F is a firmware incorporating CD
(2 views)
M50FW040 (ST Microelectronics)
4 Mbit 512Kb x8/ Uniform Block 3V Supply Firmware Hub Flash Memory
M50FW040
4 Mbit (512Kb x8, Uniform Block) 3V Supply Firmware Hub Flash Memory
s
SUPPLY VOLTAGE – VCC = 3V to 3.6V for Program, Erase and Read Operati
(2 views)
N82802 (Intel Corporation)
Firmware Hub (FWH)
R
Intel® 82802AB/82802AC Firmware Hub (FWH)
Datasheet
November 2000
Document Number: 290658-004
Intel 82802AB/AC Firmware Hub
R
®
Information in
(2 views)
M50FLW040A (ST Microelectronics)
4 Mbit 3V Supply Firmware Hub / Low Pin Count Flash Memory
www.DataSheet4U.com
M50FLW040A M50FLW040B
4 Mbit (5 x 64KByte Blocks + 3 x 16 x 4KByte Sectors) 3V Supply Firmware Hub / Low Pin Count Flash Memory
P
(2 views)
AT26DF161 (ATMEL Corporation)
16-megabit 2.7-volt Only Serial Firmware DataFlash Memory
Features
• Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes 0 and 3 • 66 MHz Maximum Clock Frequency • Fl
(2 views)
AT26DF321 (ATMEL Corporation)
(AT25DF321 / AT26DF321) 32M-Bit Serial Firmware Dataflash Memory
www.DataSheet4U.com
Features
• Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes 0 and 3
• 66 MHz Maximu
(2 views)
SST49LF004 (Silicon Storage Technology)
4 Megabit Firmware Hub
4 Megabit Firmware Hub
SST49LF004
Advance Information
FEATURES:
• Firmware Hub for Intel® 810, 810E, 820, 840 Chipsets
• 4Mbits SuperFlash memory ar
(2 views)
IS49FL004T (Integrated Silicon Solution)
4 Mbit 3.3 Volt-only Firmware Hub/LPC Flash Memory
IS49FL004T
4 Mbit 3.3 Volt-only Firmware Hub/LPC Flash Memory
FEATURES
SEPTEMBER 2013
• Single Power Supply Operation - Low voltage range: 3.0 V -
(2 views)
82802AB (Intel Corporation)
Firmware Hub (FWH)
R
Intel® 82802AB/82802AC Firmware Hub (FWH)
Datasheet
November 2000
Document Number: 290658-004
Intel 82802AB/AC Firmware Hub
R
®
Information in
(1 views)
82802AC (Intel Corporation)
Firmware Hub (FWH)
R
Intel® 82802AB/82802AC Firmware Hub (FWH)
Datasheet
November 2000
Document Number: 290658-004
Intel 82802AB/AC Firmware Hub
R
®
Information in
(1 views)
AT49LW040 (ATMEL Corporation)
8-megabit and 4-megabit Firmware Hub Flash Memory
Features
• Low Pin Count (LPC) BIOS Device • Functions as Firmware Hub for Intel 810, 810E, 820, 840 Chipsets • 8M or 4M Bits of Flash Memory for Plat
(1 views)
AT49LW080 (ATMEL Corporation)
8-megabit and 4-megabit Firmware Hub Flash Memory
Features
• Low Pin Count (LPC) BIOS Device • Functions as Firmware Hub for Intel 810, 810E, 820, 840 Chipsets • 8M or 4M Bits of Flash Memory for Plat
(1 views)
AT49LH002 (ATMEL)
2-megabit Firmware Hub and Low-Pin Count Flash Memory
Features
• Complies with Intel® Low-Pin Count (LPC) Interface Specification Revision 1.1 – Supports both Firmware Hub (FWH) and LPC Memory Read and Wr
(1 views)
M50FW002 (ST Microelectronics)
2 Mbit 256Kb x8/ Boot Block 3V Supply Firmware Hub Flash Memory
M50FW002
2 Mbit (256Kb x8, Boot Block) 3V Supply Firmware Hub Flash Memory
PRELIMINARY DATA
FEATURES SUMMARY s SUPPLY VOLTAGE – VCC = 3 V to 3.6 V fo
(1 views)
M50FW016 (ST Microelectronics)
16 Mbit 2Mb x8/ Uniform Block 3V Supply Firmware Hub Flash Memory
M50FW016
16 Mbit (2Mb x8, Uniform Block) 3V Supply Firmware Hub Flash Memory
PRELIMINARY DATA
s
SUPPLY VOLTAGE – VCC = 3 V to 3.6 V for Program, Eras
(1 views)
M50FW080 (ST Microelectronics)
8 Mbit 1Mb x8/ Uniform Block 3V Supply Firmware Hub Flash Memory
M50FW080
8 Mbit (1Mb x8, Uniform Block) 3V Supply Firmware Hub Flash Memory
s
SUPPLY VOLTAGE – VCC = 3V to 3.6V for Program, Erase and Read Operation
(1 views)