Datasheet4U Logo Datasheet4U.com

DS92LV040A - 4 Channel Bus LVDS Transceiver

Description

The DS92LV040A is one in a series of Bus LVDS transceivers designed specifically for high speed, low power backplane or cable interfaces.

The device operates from a single 3.3V power supply and includes four differential line drivers and four receivers.

Features

  • a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector. The driver translates 3V LVTTL levels (single-ended) to differential Bus LVDS (BLVDS) output levels. This allows for high speed operation while consuming minimal power and reducing EMI. In addition, the differential signaling provides common mode noise rejection greater than ± 1V. The receiver threshold is less than +0/.
  • 70 mV. The receiver translates the differential Bus LVDS to stand.

📥 Download Datasheet

Datasheet preview – DS92LV040A

📁 Similar Datasheet

  • DS92LV040A - 4-Channel Bus LVDS Transceiver (Texas Instruments)
  • DS92LV0411 - Link-II Serializer/Deserializer (Texas Instruments)
  • DS92LV0412 - Link-II Serializer/Deserializer (Texas Instruments)
  • DS92LV0421 - 10-MHz to-75 MHz Channel Link-II Serializer/Deserializer (Texas Instruments)
  • DS92LV0422 - 10-MHz to-75 MHz Channel Link-II Serializer/Deserializer (Texas Instruments)
  • DS92LV010A - Bus LVDS 3.3/5.0V Single Transceiver (Texas Instruments)
  • DS92LV090A - 9-Channel Bus LVDS Transceiver (Texas Instruments)
  • DS92LV1021 - LVDS Serializer/Deserializer (Texas Instruments)
  • DS92LV1210 - LVDS Serializer/Deserializer (Texas Instruments)
  • DS92LV1260 - Six Channel 10 Bit BLVDS Deserializer (Texas Instruments)
Other Datasheets by National Semiconductor
  • DS92LV0411 - 5 - 50 MHz Channel Link II Serializer/Deserializer
  • DS92LV0412 - 5 - 50 MHz Channel Link II Serializer/Deserializer
  • DS92LV0421 - 10 - 75 MHz Channel Link II Serializer/Deserializer
  • DS92LV0422 - 10 - 75 MHz Channel Link II Serializer/Deserializer
  • DS92LV010A - Bus LVDS 3.3/5.0V Single Transceiver
  • DS92LV010AEP - Bus LVDS 3.3/5.0V Single Transceiver
  • DS92LV090A - 9 Channel Bus LVDS Transceiver
  • DS92LV090AEP - 9 Channel Bus LVDS Transceiver

Full PDF Text Transcription

Click to expand full text
DS92LV040A 4 Channel Bus LVDS Transceiver August 2002 DS92LV040A 4 Channel Bus LVDS Transceiver General Description The DS92LV040A is one in a series of Bus LVDS transceivers designed specifically for high speed, low power backplane or cable interfaces. The device operates from a single 3.3V power supply and includes four differential line drivers and four receivers. To minimize bus loading, the driver outputs and receiver inputs are internally connected. The device also features a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector. The driver translates 3V LVTTL levels (single-ended) to differential Bus LVDS (BLVDS) output levels. This allows for high speed operation while consuming minimal power and reducing EMI.
Published: |