logo
Half-Duplex

Half-Duplex DataSheet

Exar

SP3483 - +3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver

 · 15 Hits Exar's BiCMOS design allowing low power operation without sacrificing performance. The SP3483 is slew rate limited to reduce EMI and can meet the requ...
SIT

SIT3088E - 14Mbps Half-Duplex RS485/RS422 Transceiver

 · 15 Hits OUTLINE ➢ 3.0V~5.5V Wide Power Range, Half-Duplex ➢ ESD Protection for RS-485 I/O Pins ±15kV, Human Body Model ➢ Bus Fault Tolerance and Withstand V...
NOVOSENSE

NSi83086E - High Reliability Isolated Half and Full-Duplex RS-485 Transceivers

 · 11 Hits  Up to 5000Vrms Insulation voltage  Bus side power supply voltage: 3.0V to 5.5V  VDD1 supply voltage: 2.5V to 5.5V  High CMTI: ±150kV/us  High sy...
NOVOSENSE

NSi83085E - High Reliability Isolated Half and Full-Duplex RS-485 Transceivers

 · 10 Hits  Up to 5000Vrms Insulation voltage  Bus side power supply voltage: 3.0V to 5.5V  VDD1 supply voltage: 2.5V to 5.5V  High CMTI: ±150kV/us  High sy...
MaxLinear

SP3483 - 3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver

 · 8 Hits MaxLinear’s BiCMOS design allowing low power operation without sacrificing performance. The SP3483 is slew rate limited to reduce EMI and can meet the...
MaxLinear

SP485E - Enhanced Low Power Half-Duplex RS-485 Transceivers

 · 7 Hits ■ 5V only ■ Low power BiCMOS ■ Driver / receiver enable for multi-drop configurations ■ Low power shutdown mode (SP481E) ■ Enhanced ESD specifications...
Exar

SP485 - Low Power Half-Duplex RS-485 Transceivers

 · 7 Hits • +5V Only • Low Power BiCMOS • Driver / Receiver Enable • Slew Rate Limited Driver for Low EMI (SP483) • Low Power Shutdown mode (SP483) • RS-485 and...
Analog Devices

ADM4852 - Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers

 · 7 Hits EIA RS-485-/RS-422-compliant Data rate options ADM4850/ADM4854: 115 kbps ADM4851/ADM4855: 500 kbps ADM4852/ADM4856: 2.5 Mbps ADM4853/ADM4857: 10 Mbps ...
Maxim Integrated

MAX14945 - 2.75kVRMS Isolated 500kbps Half-Duplex RS-485/RS-422 Transceiver

 · 6 Hits ...
Exar

SP485E - Enhanced Low Power Half-Duplex RS-485 Transceivers

 · 6 Hits Exar's BiCMOS design allowing low power operation without sacrificing performance. The SP481E and SP485E meet the requirements of the RS-485 and RS-42...
Sipex

SP485 - Low Power Half-Duplex RS-485 Transceivers

 · 6 Hits ■ +5V Only ■ Low Power BiCMOS ■ Driver/Receiver Enable ■ Slew Rate Limited Driver for Low EMI (SP483) ■ Low Power Shutdown Mode (SP481 and SP483) ■ RS...
Analog Devices

ADM4856 - Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers

 · 6 Hits EIA RS-485-/RS-422-compliant Data rate options ADM4850/ADM4854: 115 kbps ADM4851/ADM4855: 500 kbps ADM4852/ADM4856: 2.5 Mbps ADM4853/ADM4857: 10 Mbps ...
Texas Instruments

ISO3082 - 5-V Full- and Half-Duplex RS-485 Transceivers

 · 6 Hits •1 Meets or Exceeds TIA/EIA RS-485 Requirements • Signaling Rates up to 20 Mbps • 1/8 Unit Load – Up to 256 Nodes on a Bus • Thermal Shutdown Protecti...
MaxLinear

SP485 - Low Power Half-Duplex RS-485 Transceivers

 · 6 Hits • +5V Only • Low Power BiCMOS • Driver / Receiver Enable • Slew Rate Limited Driver for Low EMI (SP483) • Low Power Shutdown mode (SP483) • RS-485 and...
MORNSUN

SCM3406A - Half-duplex Transceiver

 · 6 Hits  3.0-5.5V single supply operation  Baud Rate Up to 10 Mbps  1/8 Unit Load—Up to 256 Nodes on a Bus  Bus-Pin ESD Protection Up to 15 kV  Driver sh...
Exar Corporation

XR16C850 - UART with 128-byte FIFOs FIFO Counters and Half-duplex Control

 · 5 Hits D5 D6 D7 S2 RX A4 TX A5 A6 A7 -LPT1 7 8 9 10 11 12 13 14 15 16 17 6 5 4 3 2 1 -CTS VCC -CD -RI D4 D3 D2 D1 D0 A9 -AS RESET -OP1 -DTR...
MaxLinear

SP3485 - 3.3V Low Power Half-Duplex RS-485 Transceiver

 · 5 Hits ■■ RS-485 and RS-422 transceiver ■■ Operates from a single 3.3V supply ■■ Interoperable with 5.0V logic ■■ Driver/receiver enable ■■ -7V to +12V commo...
Sipex

SP1481E - 15kV Enhanced Low Power Half-Duplex RS-485 Transceivers

 · 5 Hits Sipex's BiCMOS design allowing low power operation without sacrificing performance. The SP1481E meets the requirements of the RS-485 and RS-422 protoc...
Exar

SP483E - Enhanced Low EMI Half-Duplex RS-485 Transceiver

 · 5 Hits Exar's BiCMOS design allowing low power operation without sacrificing performance. The SP483E is internally slew rate limited to reduce EMI and can me...
Analog Devices

ADM2483 - Half-Duplex iCoupler Isolated RS-485 Transceiver

 · 5 Hits RS-485 transceiver with electrical data isolation Complies with ANSI TIA/EIA RS-485-A and ISO 8482: 1987(E) 500 kbps data rate Slew rate-limited drive...
logo
Since 2006. D4U Semicon.   |   Contact Us   |   Privacy Policy