Datasheet4U Logo Datasheet4U.com

EDD2516AKTA-5-E - 256M bits DDR SDRAM (16M words x16 bits DDR400)

General Description

The EDD2516AKTA-5 is a 256M bits DDR SDRAM organized as 4,194,304 words × 16 bits × 4 banks.

Read and write operations are performed at the cross points of the CK and the /CK.

This high-speed data transfer is realized by the 2 bits prefetch-pipelined architecture.

Key Features

  • Power supply: VDD, VDDQ = 2.6V ± 0.1V.
  • Data rate: 400Mbps (max. ).
  • Double Data Rate architecture; two data transfers per clock cycle.
  • Bi-directional data strobe (DQS) is transmitted /received with data for capturing data at the receiver.
  • Data inputs, outputs, and DM are synchronized with DQS.
  • 4 internal banks for concurrent operation.
  • DQS is edge aligned with data for READs; center aligned with data for WRITEs.
  • Differential.

📥 Download Datasheet

Datasheet Details

Part number EDD2516AKTA-5-E
Manufacturer Elpida Memory
File Size 602.00 KB
Description 256M bits DDR SDRAM (16M words x16 bits DDR400)
Datasheet download datasheet EDD2516AKTA-5-E Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EDD11 Doppelendtriode TELEFUNKEN

Other Datasheets by Elpida Memory

Part Number Description
EDD2516AKTA-E 256M bits DDR SDRAM (16M words x16 bits DDR400)
EDD2516AETA (EDD2508AETA / EDD2516AETA) 256M bits DDR SDRAM
EDD2504AKTA 256M bits DDR SDRAM (64M words x 4 bits)
EDD2504AKTA 256M bits DDR SDRAM (64M words x 4 bits)
EDD2504AKTA-E 256M bits DDR SDRAM (64M words x 4 bits)

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
( DataSheet : www.DataSheet4U.com ) DATA SHEET 256M bits DDR SDRAM EDD2516AKTA-5-E (16M words × 16 bits, DDR400) Description The EDD2516AKTA-5 is a 256M bits DDR SDRAM organized as 4,194,304 words × 16 bits × 4 banks. Read and write operations are performed at the cross points of the CK and the /CK. This high-speed data transfer is realized by the 2 bits prefetch-pipelined architecture. Data strobe (DQS) both for read and write are available for high speed and reliable data bus design. By setting extended mode register, the on-chip Delay Locked Loop (DLL) can be set enable or disable. It is packaged in 66-pin plastic TSOP (II). Pin Configurations /xxx indicates active low signal.