900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Skyworks Solutions

SKY12213-478LF Datasheet Preview

SKY12213-478LF Datasheet

150 W High Power Silicon PIN Diode SPST Switch

No Preview Available !

DATA SHEET
SKY12213-478LF: 0.5-6.0 GHz, 150 W High Power Silicon PIN
Diode SPST Switch
Applications
Failsafe switching in TD-SCDMA, WiMAX, and LTE TDD base
stations
On/off switching in land mobile radios and military
communications systems
High power series diodes
Features
High power handling: 150 W CW
Low insertion loss: 0.5 to 1.0 dB typical
High isolation: 23 dB typical
Controlled with positive power supply
Small, QFN (16-pin, 4 x 4 mm) Pb-free package (MSL1, 260 °C
per JEDEC J-STD-020)
Figure 1. SKY12213-478LF Block Diagram
Description
The SKY12213-478LF is a high power handling, Single-Pole,
Single-Throw (SPST) silicon PIN diode switch. The device operates
over the 0.5 GHz to 6.0 GHz band. It features low insertion loss,
excellent power handling, and superb linearity with low DC power
consumption.
The SKY12213-478LF is well-suited for use as a high power SPST
switch in a variety of telecommunication systems such as WiMAX,
TD-SCDMA,http://www.DataSheet4U.net/ or LTE base stations. It can also be used as a high
power series diode in a multitude of PIN diode applications.
The device is provided in a 4 x 4 mm, 16-pin Quad Flat No-Lead
(QFN) package. A functional block diagram is shown in Figure 1.
The pin configuration and package are shown in Figure 2. Signal
pin assignments and functional pin descriptions are provided in
Table 1.
Figure 2. SKY12213-478LF Pinout – 16-Pin QFN
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202180C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 11, 2013
1
datasheet pdf - http://www.DataSheet4U.net/




Skyworks Solutions

SKY12213-478LF Datasheet Preview

SKY12213-478LF Datasheet

150 W High Power Silicon PIN Diode SPST Switch

No Preview Available !

DATA SHEET • SKY12213-478LF HIGH POWER PIN DIODE SPST SWITCH
Table 1. SKY12213-478LF Signal Descriptions
Pin # Name
Description
1 GND
Ground. Must be connected to ground using
lowest possible impedance.
2 IN_1
Input RF port 1 and DC bias input port.
3 IN_2
Input RF port 2 and DC bias input port.
4 GND
Ground. Must be connected to ground using
lowest possible impedance.
5 N/C
No connection
6 N/C
No connection
7 N/C
No connection
8 N/C
No connection
Pin #
9
10
11
12
13
14
15
16
Name
GND
OUT_2
OUT_1
GND
N/C
N/C
N/C
N/C
Description
Ground. Must be connected to ground using
lowest possible impedance.
Output RF port 2 and DC bias input port.
Output RF port 1 and DC bias input port.
Ground. Must be connected to ground using
lowest possible impedance.
No connection
No connection
No connection
No connection
Table 2. SKY12213-478LF Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
RF CW input power @ input ports (TSUBSTRATE = 25 °C)
PIN
190 W
RF peak input power @ input ports (TSUBSTRATE = 25 °C, RF burst
width = 10 μs, RF burst repetition rate = 250 kHz)
PIN
760 W
Control port reverse voltage
VCTL
200 V
Control port forward current
ICTL
200 mA
Operating temperature
TOP
55 +175
°C
Storage temperature
TSTG
55 +200
°C
Electrostatic Discharge:
Charged Device Model (CDM), Class 4
Human Body Model (HBM), Class 2
Machine Model (MM), Class B
ESD
http://www.DataSheet4U.net/
1000 V
2000 V
200 V
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. Recommended Operating Conditions
Parameter
Symbol Min Typical Max
Control port forward voltage
VCTL
0 +28 +100
Control port reverse voltage
VCTL
100 28
0
Control port forward current
ICTL
50 100 100
Units
V
V
mA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 January 11, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202180C
datasheet pdf - http://www.DataSheet4U.net/


Part Number SKY12213-478LF
Description 150 W High Power Silicon PIN Diode SPST Switch
Maker Skyworks Solutions
PDF Download

SKY12213-478LF Datasheet PDF





Similar Datasheet

1 SKY12213-478LF 150 W High Power Silicon PIN Diode SPST Switch
Skyworks Solutions





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy