AZ760 Datasheet | ZETTLER Electronics

20 AMP MINIATURE POWER RELAY .. Features - - - - - - Low cost 20 Amp switching 60 Amp inrush current Quick connect terminals Flux tight construction UL, CUR file E44211 CONTACTS Arrangement Ratings SPST (1 Form A) Resistive load: Max. switched power: 600 W or 4400 VA Max. switched current: 20 A Max. switched voltage: 150 VDC- or 400 VAC - Note: If switching voltage is greater than 30 VDC, GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 20 A 230 VAC Res. 15 ms at nominal coil voltage 10 ms at nominal coil voltage (with no coil suppression) special precautions must be taken. Please contact the factory. Rated Load UL, CUR Material Resistance Dielectric Strength 2000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10- 55 Hz 20 A at 220 VAC, 100k cycles 1.5 HP 250 VAC, 100k cycles Silver cadmium oxide < 50 milliohms initially (24 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 441 m W 3.0 W at 20°C (68°F) ambient 35°C (63°F) at nominal coil voltage Max. 130°C (266°F) Operating 20 g, 11 ms, 1/2 sine (no false operation) Non-Operating 100 g, 11 ms, 1/2 sine (no damage) Enclosure Terminals P.B.T. polyester Tinned copper alloy P. C. & quick connect Note: Allow suitable slack on leads when wiring and do not subject the terminals to excessive force. NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Max. Solder Temp. Max. Solder Time Weight Packing unit in pcs 270°C (518°F) 5 seconds 40...