AZ766 Datasheet | ZETTLER Electronics

SPST SUBMINIATURE POWER RELAY .. Features - - - - - - Small footprint Low seated height Low cost Epoxy sealed version available 12 Amp switching UL, CUR file E44211 CONTACTS Arrangement Ratings SPST (1 Form A) Resistive load: Max. switched power: 300 W or 2770 VA Max. switched current: 13.5 A Max. switched voltage: 150 VDC- or 400 VAC - Note: If switching voltage is greater than 30 VDC, GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 12 A 125 VAC Res. 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) special precautions must be taken. Please contact the factory. Rated Load UL, CUR Dielectric Strength 2500 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure 1000 megohms min. at 20°C 500 VDC 50% RH Greater than 5% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (188°F) -40°C (-40°F) to 105°C (221°F) 0.040" (1.0 mm) DA at 10- 50 Hz 10 g operating, 100 g damage P.B.T. polyester Tinned copper alloy, P. C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 6 grams 50 per plastic tube / 1500 per carton box 13.5 A at 125 VAC 12 A at 125 VAC, general use, 100k cycles 10 A at 277 VAC / 30 VDC, 100k cycles TV- 5 1/ HP at 125 VAC / 250 VAC 4 Silver tin oxide < 50 milliohms initially Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 253 m W 1.3 W at 20°C (68°F) ambient 39°C (70°F) at nominal coil voltage Max. 130°C (266°F) Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Packing unit in pcs ZETTLER electronics Gmb H Tel. +49 89 800 97 0...