Datasheet4U Logo Datasheet4U.com

74HCT174-Q100 - Hex D-type flip-flop

This page provides the datasheet information for the 74HCT174-Q100, a member of the 74HC174-Q100 Hex D-type flip-flop family.

Description

The 74HC174-Q100; 74HCT174-Q100 are hex positive edge-triggered D-type flip-flops with individual data inputs (Dn) and outputs (Qn).

The common clock (CP) and master reset (MR) inputs load and reset all flip-flops simultaneously.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Input levels:.
  • For 74HC174-Q100: CMOS level.
  • For 74HCT174-Q100: TTL level.
  • Six edge-triggered D-type flip-flops.
  • Asynchronous master reset.
  • Complies with JEDEC standards.

📥 Download Datasheet

Datasheet preview – 74HCT174-Q100

Datasheet Details

Part number 74HCT174-Q100
Manufacturer nexperia
File Size 247.28 KB
Description Hex D-type flip-flop
Datasheet download datasheet 74HCT174-Q100 Datasheet
Additional preview pages of the 74HCT174-Q100 datasheet.

📁 Similar Datasheet

  • 74HCT174 - Hex D-type flip-flop (Philips)
  • 74HCT173 - Quad D-type flip-flop (Philips)
  • 74HCT173 - Quad D-Type Flip-Flop (Texas Instruments)
  • 74HCT175 - Quad D-type flip-flop (Philips)
  • 74HCT10 - Triple 3-input NAND gate (Philips)
  • 74HCT107 - Dual JK flip-flop (Philips)
  • 74HCT109 - Dual JK flip-flop (Philips)
  • 74HCT11 - Triple 3-input AND gate (Philips)
  • 74HCT11 - Triple 3-input AND gate (NXP)
  • 74HCT112 - Dual JK flip-flop (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC174-Q100; 74HCT174-Q100 Hex D-type flip-flop with reset; positive-edge trigger Rev. 2 — 26 February 2021 Product data sheet 1. General description The 74HC174-Q100; 74HCT174-Q100 are hex positive edge-triggered D-type flip-flops with individual data inputs (Dn) and outputs (Qn). The common clock (CP) and master reset (MR) inputs load and reset all flip-flops simultaneously. The D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition is stored in the flip-flop and appears at the Q output. A LOW on MR causes the flip-flops and outputs to be reset LOW. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Published: |